Click on the image to check the artwork
Working temperature: -45ºC ~ 125ºC
Shrink temperature: 70ºC ~ 125ºC
Shrink ratio: 3:1
The soft heavy adhesive-lined heat shrinkable tube adopts flame retardant, cross-linked polyolefin material with an inner coating of hot-melt adhesive and outer layer that shrinks to provide electrical and mechanical protection. The outer layer has excellent insulation, wear and corrosion resistant performances. The inner layer has the excellence of low melt point and waterproof etc. It has passed UL,
RoHS, Reach certifications with 600V and 300V.
It is widely used in manufacturing of electrical and electronics, communications, automobiles, shipping, aircraft, etc.
Production standards: UL224, CAN/CSA C22.2 NO198.1-99, SAE-AMS-DTL-23053/4
Inner Diameter |
As Supplied (mm) |
After Recovery(mm) |
Package |
||||
(inch) |
(mm) |
ID |
Max ID |
Total Wall Thickness |
Glue Thickness |
(m/roll) |
(m/pc) |
1/8 |
φ3.2 |
≥3.2 |
≤1.00 |
0.90±0.30 |
0.45±0.20 |
200 |
— |
3/16 |
φ4.8 |
≥4.8 |
≤1.60 |
1.20±0.30 |
0.55±0.20 |
100 |
— |
1/4 |
φ6.4 |
≥6.4 |
≤2.20 |
1.25±0.30 |
0.55±0.20 |
100 |
— |
5/16 |
φ7.9 |
≥7.9 |
≤2.70 |
1.35±0.30 |
0.65±0.20 |
100 |
— |
3/8 |
φ9.5 |
≥9.5 |
≤3.20 |
1.35±0.30 |
0.65±0.20 |
50 |
1.22 |
1/2 |
φ12.7 |
≥12.7 |
≤4.20 |
1.55±0.40 |
0.75±0.20 |
— |
1.22 |
5/8 |
φ15.0 |
≥15.0 |
≤5.20 |
1.65±0.40 |
0.75±0.20 |
— |
1.22 |
3/4 |
φ19.1 |
≥19.1 |
≤6.30 |
1.90±0.40 |
0.85±0.20 |
— |
1.22 |
1 |
φ25.4 |
≥25.4 |
≤8.50 |
2.00±0.40 |
0.90±0.20 |
— |
1.22 |
1-1/4 |
φ30.0 |
≥30.0 |
≤10.20 |
2.05±0.40 |
0.90±0.20 |
— |
1.22 |
1-1/2 |
φ39.0 |
≥39.0 |
≤13.50 |
2.35±0.40 |
1.05±0.20 |
— |
1.22 |
